Description

Osmio EZFITPRO-300 Undersink Water Filter Kit 15mm Push Fit

The Osmio EZFITPRO-300 Water Filter System is a ideal water filter system for installing under the kitchen sink. The system has no need for a separate tap as it will filter all the water coming from your existing kitchen tap. This is because the Osmio EZFITPRO-300 System uses 15mm push fittings for the 1/2″ BSP female inlet and outlet. This means your 15 mm copper or plastic pipe can simply be pushed into the unit and released with ease.

The Osmio EZFITPRO-300 therefore makes a perfect solution for an easy installation as it can be fitted in less than 15 minutes. The system is perfect if you have a solid kitchen worktop (marble, granite, stone, wood etc.) and do not want to have a separate tap in place. There is an option to have this exact system with a separate tap and fitting kit if you would prefer to have this option, as many people which children or very elderly persons do often prefer a separate tap.

What does the Osmio EZFITPRO-300 remove?

There are two filters in the system, which both serve a different purpose with the ultimate result being purified, clean, healthy and great tasting water for all your drinking, cooking, washing and cleaning needs.

Filter 1: Coldstream CF108W Ceramic Water Filter Cartridge 2.9″ x 9.75″ OBE – changed every 6-12 month

✓ Perfect replacement for the Doulton OBE Ultracarb or Supercarb and fits all standard 10″ small diameter housings.

✓ Made in the UK by world leading manufacturer

✓ >99.9999% removal of bacteria and cysts

✓ Long lasting and easily changed

The Coldstream CF108W is a high performing ceramic cartridge for reduction chlorine, heavy metals and bacteria and cysts, making it the most powerful ceramic cartridge currently on the market. This filter can be a direct replacement for any 2.5 x 10 Inch cartridge and comes with rubber washer rings to ensure it will fit any housing.

Operating performance

Working Pressure (for pressure use)
Minimum 10 Psi Maximum 125 Psi

Working parameters
Working temperature range 5 – 30oC Working ph range 5.5 – 9.5
Suitable for gravity filters No
Recommended change frequency 6 months
Nominal Flow rate** To achieve maximum performance Litres / minute 2.84 US gallons / minute 0.75
Capacity Before replacement to guarantee performance Litres 3000 US gallons 792
Contaminant Removal Pathogenic Organisms % Bacteria Removal Rate E.Coli / Cholera / Shigella / Typhoid / Klebsiella Terrigena 99.9999% % Cyst Removal Cryptosporidium / Giardia 99.9999%
Trace Organics Removal*** Volatile Organic Contaminants 99.90% Lead removal 93.20% Heavy Metal Contaminants 99.90% Pesticide Contaminants 99.90% Herbicide Contaminants 99.90% Excluding Lead , Nickel and Zinc
Inorganics Removal Free Chlorine Removal @ 2 ppb presence* 99.90% Chloramine Removal @ 3 ppb presence* 99.90% Fluoride Removal @ 8 ppb presence* 25.00%
Size length 9.75″ Diameter 2.9″ Fitting OBE Fitting Length N/A
** (defined mean flow, Typical range +25% -20%) *** Product tested by Envirotech Laboratories inc to NSF53 standard a Antimony, Arsenic, Beryllium, Bismuth, Chromium, Mercury,Selenium

Filter 2: The Osmio GAC & De-Alk Resin Cartridge –  changed approx every 3-6 months (dependent on hardness)

✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction

✔ De-alk resin – for temporary hardness and heavy metal reduction

The Osmio 2.5 x 10 GAC & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.

Capacity: 1080 Litres @ 150ppm Total Hardness – 540 Litres @ 300ppm Total Hardness.

 

Included with the system

– Osmio 2.5 x 10 Inch Dual Filter Housing (1/2″ BSP Female Inlet/Outlet (Brass lined))
– Dual Mounting Bracket
– Housing Spanner
– 2 x 1/2″ BSP male to 15mm push fit
– 1 x Chlorine and limescale filter
– 1 x Coldstream Ceramic filter